Skip to main navigation menu Skip to main content Skip to site footer

Articles

Vol. 5 (1993)

The A Speo Method of Heat Rounding Drawn Glass Beads and its Archaeological Manifestations

DOI:
https://doi.org/10.7264/rv3ftn70
Submitted
January 15, 2025
Published
January 15, 2025

Abstract

From at least the early 17th century to the latter part of the 18th century, drawn glass beads over about 4 mm in diameter were generally rounded in European glasshouses using a method called a speo by the Italians who apparently invented it. The little-known process involved mounting a number of tube segments on the tines of a multi-pronged iron implement which was then inserted in a furnace and turned until the tubes were rounded to the desired degree. Beads produced in this manner often exhibit distinctive characteristics and are easily identified in archaeological collections.

Similar Articles

1-10 of 329

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)

<< < 1 2 3 4 5 6 7 > >>